Preparation and evaluation of a novel molecularly imprinted SPE monolithic capillary column for the determination of auramine O in shrimp

A novel method combining molecular imprinting and SPE was developed in a capillary column for the determination of auramine O in shrimp. The capillary monolithic column was prepared by UV‐initiated in situ polymerization, using auramine O as template and methacrylic acid and ethylene dimethacrylate as functional monomer and cross‐linker, respectively. The properties of the prepared capillary monolithic column were investigated under the optimized conditions coupled with HPLC, and then the morphologies of the inner polymers were characterized by SEM. The calibration curve was expressed as A = 103C + 19.8 (r = 0.9992) with a linear range of 0.25–25.0 μg/mL, and the recoveries of auramine O at different concentrations in shrimp ranged from 90.5 to 92.4% with RSDs ranging from 2.1 to 4.4%. The capacities of the molecularly imprinted polymer and nonimprinted polymer columns were 0.722 and 0.147 μg/mg, respectively, and the LOD (S/N = 3) of auramine O in shrimp was 17.85 μg/kg. Under the selected conditions, the enrichment factors obtained were higher than 70‐fold. The results indicate that the prepared molecularly imprinted capillary monolithic column was reliable and applicable to the analysis of auramine O in shrimp.     

扇形磁场电感耦合等离子体质谱法测定硫同位素组成

在中分辨模式(m/Δm=4000)下,利用扇形磁场电感耦合等离子体质谱仪(SF-ICP-MS)建立了精确测定硫同位素组成的方法,对ICP离子源、光学透镜系统、数据获取参数(扫描时间、扫描次数、积分窗口等)以及浓度效应进行了系统优化和评估,并用"标准-样品"交叉法校正仪器自身的质量歧视。在此基础上,在不同日期重复测定了GBW04414和GBW04415硫同位素参考物质的δ34SV-CDT,分别为"0.01‰±0.31‰和22.15‰±0.42‰,误差<±0.06‰,精密度<±0.5‰(n=10),达到了目前同类方法所报道的最高水平。同时,对瓶装矿泉水、雨水和河水等天然水样中δ34S进行了测定,测定精密度为±0.19‰～±0.58‰,与同位素参考物质的测定精密度相近。因此,本方法可用于精确测定天然水样中S同位素组成。     

单壁碳纳米管对C-C键水解酶BphD的固定化性能

采用修饰与未修饰单壁碳纳米管固定C-C键水解酶BphD,并对固定化酶的相对活性、稳定性、重复使用性进行了考察.结果表明,未修饰单壁碳纳米管固定的BphD相对活性为游离态的52.5%,其热稳定性和在变性剂中的稳定性均有所提高,且重复使用10次仍可保持初始活力的90%.修饰单壁碳纳米管固定的BphD相对活性可达99.7%,但其稳定性没有明显提高.同源模建及分子对接分析结果显示,未修饰的单壁碳纳米管对BphD亚基之间的联系可能存在干扰作用,从而对其活性产生影响.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

石墨炉原子吸收光谱法测定海产品中镉含量

采用固体进样-石墨炉原子吸收光谱法测定海产品中镉的含量。以1.0 g·L^-1硝酸铅溶液为基体改进剂,灰化温度为950℃,原子化温度为1 900℃。镉的进样量在0.05～0.2 ng之间与其吸光度呈线性关系,检出限（3s）为0.015 ng。应用此法分析了海产品样品,加标回收率在60.0%～90.0%之间,测定结果与液体进样-石墨炉原子吸收光谱法测定结果基本一致。     

两个4-[(8-羟基-5-喹啉)偶氮]苯磺酸配合物的合成、结构及性质研究

以4-[(8-羟基-5-喹啉)偶氮]苯磺酸(H₂L)为配体,采用溶剂热合成法合成了两个配合物[CuL(en)]·0.5H₂O (1)和[CuL₂][Cu(en)₂]·2H₂O (2)(en=乙二胺),并采用单晶X-射线衍射、红外光谱、元素分析、X-射线粉末衍射和热重分析对其进行表征。化合物1和2通过氢键和π…π相互作用连接形成了三维超分子网格。此外,还研究了两个化合物的荧光性质。     

一般状态空间跳过程的不可约性

本文研究了一般状态空间跳过程的ψ-不可约性.利用与马氏链类似的方法,得到了最大不可约测度及其性质,推广了离散时间一般状态空间马氏链的结果,作为应用,给出了C∈E+的充分条件.最后,证明了跳过程、骨架链、跳跃链和预解链的ψ-不可约是等价的.     

Clickable SBA‐15 to Screen Functional Groups for Adsorption of Antibiotics

Pharmaceutical antibiotics, as emerging contaminants, are usually composed of several functional groups that endow them with the ability to interact with adsorbents through different interactions. This makes the preparation of adsorbents tedious and time‐consuming to screen appropriate functionalized materials. Herein, we describe the synthesis of clickable SBA‐15 and demonstrate its feasibility as a screening material for the adsorption of antibiotics based on similar adsorption trends on materials with similar functional groups obtained by a click reaction and cocondensation/grafting methods.     

Recent Progress on Transition Metal Catalyst Separation and Recycling in ATRP

Atom transfer radical polymerization (ATRP) is a versatile and robust tool to synthesize a wide spectrum of monomers with various designable structures. However, it usually needs large amounts of transition metal as the catalyst to mediate the equilibrium between the dormant and propagating species. Unfortunately, the catalyst residue may contaminate or color the resultant polymers, which limits its application, especially in biomedical and electronic materials. How to efficiently and economically remove or reduce the catalyst residue from its products is a challenging and encouraging task. Herein, recent advances in catalyst separation and recycling are highlighted with a focus on (1) highly active ppm level transition metal or metal free catalyzed ATRP; (2) post‐purification method; (3) various soluble, insoluble, immobilized/soluble, and reversible supported catalyst systems; and (4) liquid‐liquid biphasic catalyzed systems, especially thermo‐regulated catalysis systems.